ALTRACO VERNIER CALIPER Manual do Utilizador descarregar pdf (Página 9)

ELECTRONIC DISC BRAKE CALIPER

repair part number:

DRG6059-2 RS232 computer interface cable (optional)

DRG6059-3 fitted case

1. Clean measuring tip and face before use. Remove cutting chips,

dust, burrs and other foreign substances from the rotor to be

measured.

2. Buttons:

- ‘mm/inch’ is for metric and inch reading conversion.

- ‘ABS’ button is for absolute and relative measuring mode

conversion. The normal mode is absolute measuring mode.

Press ‘ABS’ to enter into relative measuring mode, ‘INC’

appear on display. Press ‘ON ZERO’ button at any point (this

point is called ‘relative zero point’), the reading is zero. In this

mode, the reading at a point is the difference between the

actual value of this point and the value of relative zero point.

Press ‘ABS’ to exit from relative measuring mode and enter

into absolute measuring mode, the reading is absolute value.

Press ‘ABS’ button to enter into relative measuring mode

e 8

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 20 21

Sem comentários

ALTRACO VERNIER CALIPER Manual do Utilizador Página 9