ALTRACO VERNIER CALIPER Manual de Serviço descarregar pdf (Página 4)

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.

Therefore the company reserves the right to change any or all aspects of any product specification without notice.

D-4

About the charge function

The minimum illumination required in the

uncharged state is 60 lux.

As shown in the table at right, this SuperCaliper

can be used with confidence in a normal work

environment.

The charge function allows the operator to use

the SuperCaliper without interrupting work

even if the ambient illumination is temporarily

insufficient.

In the fully charged state this SuperCaliper

can operate for approximately one hour in an

environment of 50 lux illumination (less than the

minimum necessary illumination intensity).

The time necessary for full charge varies according

to the charging conditions. If the SuperCaliper

is left unused in an illumination of 500 lux

(usual for manufacturing environments), it takes

approximately one hour to reach full charge.

Air leak test equipment for water resistance inspection

Generally, an air leak test is used for evaluating water resistance.

Procedure: Place the measuring tool inside the capsule and seal it. Then fill the capsule and the test

chamber with air at the required pressure and close the isolating valves. If there is no leak in the

measuring tool, the differential pressure sensor will read zero, because the amount of air inside the test

chamber is unchanging. However, if there is a leak in the measuring tool, the differential pressure sensor

will show a non-zero reading due to a decrease in pressure inside the test chamber as air leaks into the

tool. By detecting this differential pressure, GO/NG judgement for the severity of the leak is performed.

This air leak test is performed for all coolant proof calipers and coolant proof micrometers.

Optional Accessories

(Only for models with data output function)

05CZA624: SPC data cable with pushbutton (1 m)

£58.50

05CZA625: SPC data cable with pushbutton (2 m)

£70.40

06ADV380A: USB Input Tool Direct USB-ITN-A (2 m)

£106.00

02AZD790A: SPC data cable for U-WAVE-T (160 mm)

£52.20

02AZE140A: SPC data cable for U-WAVE-T and footswitch

(160/500 mm)

£114.00

Illumination (lx)

1500

1000

750

500

300

200

150

100

Site (possible operations)

Design room, drafting room

(Fine visual work)

Corridor, passage, stairs

(Very rough visual work)

Emergency staircase, warehouse

(Loading, unloading work)

Excerpts from JIS Z 9110 Artificial Illumination Intensity Standard

Conference room, control room

(Usual manufacturing environment)

(Normal visual work)

Machine room, electric room, lecture hall

(Rough visual work)

Air supply

Capsule

Isolating

valves

Isolating

valves

Test chamber

Valve Valve

Master

Differential

pressure sensor

Air leak test equipment for coolant proof caliper

1 2 3 4 5 6 7 8 9 ... 71 72

Comentários a estes Manuais

Sem comentários

ALTRACO VERNIER CALIPER Manual de Serviço Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Medição, teste e controlo ALTRACO VERNIER CALIPER